Nice budget throttle option for savvy folks looking for the cheap alternative. This includes a grip yay! the throttle/perch and a brake stop knarp for your brake cable.
Super nice quality supermanish shape tail light for letting the folks behind ya know you're there.
Stockish looking chrome switch made by Guia. Use it for lights, kill, horn - whatever you want. Mounts to all 7/8" bars.
Black plastic throttle and matching 7/8 grip from Lusito.
Round black headlight with chrome rim for all mopeds. The socket in this head light uses an 1157 dual filament bulb.
Universal rear axle adjusters for any moped that uses this type of adjusters.
Black domino style rear brake lever assembly with bonus grip already installed. Super low profile assembly for a nice clean look on your bars. Spring loaded plastic brake lever, brake lever is about 5.7" long. Use these on any moped - 7/8 or 22mm handlebars.
Stock tail light. This came standard on lots of bikes including puch and tomos. Fit this on pretty much any moped ever!This uses 2x single filament bulbs.
26mm x 1.5mm and 22 x 1.5mm flywheel puller for tons of Bosch flywheels - Puch, Kreidler, Tomos a3/a35, Batavus m56, Solo and Derbi Motoplat flywheels.
Super nice quality superman shape tail light for letting the folks behind ya know you're there.
Cable stop for magura controls. Sold individually.
Super heavy duty universal ignition condenser for wiring externally. Get some new connectors if you need them.
Red light up spark plug cap for checking your spark and having an awesome glow down by your engine.
Folding Pegs for you and a buddy. These mount over the rear shock bolt.
Gooooold KMC 1/8" pedal chain for starting your moped. Comes with 112 links and a master link.
Clear fuel filter for standard 5mm fuel line.
Super awesome 5mm Tygon fuel line for all your fuel flowing needs.
Blue light up spark plug cap for checking your spark and having an awesome glow down by your engine.
Change your plug on the go with this 3/16" spark plug tool.
Awesome 2 wire on/off ignition switch perfect for mopeds.
Red 1/8" pedal chain with 112 links. Comes with a master link!
NGK spark plugs. BHS series. Best in the world!
NGK spark plugs. Resistor type short thread plugs.
NGK spark plug boot LB05EP. This is the resistor type that uses the little cap on the tip of the plug. 90 degree bend for those hard to reach places!
Silver KMC 1/8" pedal chain for starting your moped. Comes with 112 links and a master link.
Small fuel filter for all mopeds. Perfect for tight spaces like moby or maxi!
Clear light up spark plug cap for checking your spark and having an awesome glow down by your engine.
Mounting bracket clamp for stock Puch switches.
Chrome oval engine stop/kill switch cover. Commonly found on stock puchs.
Blue 1/8" pedal chain with 112 links. Comes with a master link!
Trail Tech A/C Voltage Regulator. Stop blowing out those lights on kitted bikes! -Improved A/C Regulator with Adjustable Output.
Original silver Magura throttle with spring loaded brake lever and throttle tube. This style throttle originally came on tons of mopeds - puch, peugeot, batavus, sachs, kriedler.
Nice budget rear brake control option for savvy folks looking for the cheap alternative. Has spring loaded brake lever, threaded hole for brake light switch and a non-threaded hole for a mirror. Grab the lusito throttle control and you'll have a matching set yay!
Nice budget throttle option for savvy folks looking for the cheap alternative. This includes a grip, the throttle/perch/lever and a brake stop knarp for your brake cable. This has the super comfy bumpy style lever.
Single filament BAY15D bayonet base bulb for moped tail lights. 12v/8w.
Dual filament double contact BAY15D bayonet base bulb for moped tail lights. 6.5 Volt 1.02 Amp 6.63 Watt.
Dual filament double contact BAY15D bayonet base bulb for moped tail lights. 13.5 Volt .69 Amp 9.32 Watt.
Used Puch OEM light and horn switch. Ooooooh.
You need this insert for superman tail light assemblies. This is the two bulb style, one for a 5w bulb and one for a 10w bulb.
Caged headset bearing for puch maxi, motobecane, peugeot and vespa mopeds.
Universal 12mm sealed axle bearing for front wheels. 165m with spacers.
NOS kriedler head for your kriedler engine.
Oil fill bolt screw for Kreidler clutch covers. 12mm x 1.5mm threads.
Oil drain bolt screw for Kreidler moped engines.
Replacement points for your kreidler.
Original Kriedler decompression / clutch cable. The inner part of the cable is 42 inches long, the longer outer par of the cable is 32 inches long, and the smaller outer part is 4.5 inches long
Universal high tension/external ignition coil for any moped you can fit it on. Works great with 6v or 12v points or CDI!
Check the pics for examples of what's included. Each pack is approximately 20 random pieces. Super grab-bag style!