Caged headset bearing for puch maxi, motobecane, peugeot and vespa mopeds.
300mm rear shock for puch maxi, newport, mbk, peugeot whatever you got! Double check the length you need first!These have several adjustable settings for ride comfort. 10mm eyelets on the top and bottom.
Super nice quality adjustable 300mm rear shocks. 10mm eyelets.
+25lbs of resistance from the stock spring for 1st and 2nd puch za50 and tomos clutches, saxonette clutches and m101 rear variators.
+30lbs of resistance from the stock spring for 1st and 2nd puch za50 and tomos clutches, saxonette clutches and m101 rear variators.
New new new very nice set of black sidecovers for puch maxi.
Long seat for you and a friend. Mounts to your tomos a35 style bike.
Rear sprocket for Tomos a35 and a55 with 22 teeth.
Black puch cable guide for all your maxi cable guiding needs.
5mm Dellorto main jets in the 50's range: 50, 52, 54, 56, 58. For use in all SHA and PHBG carbs
Puch 50cc high compression cylinder head with the new style fin pattern.
Super nice quality adjustable 280mm rear shocks. 10mm eyelets.
38mm x 2mm piston FG rings. Fits on Puch, Tomos a3 and some Sachs pistons. Measure twice just to be sure!
Replacement filter for your 14.9, 14.12, 14.14,15.15 and 16.16 Dellorto SHA. Includes the screen, cap and clip.
Replacement stock dual ring piston for puch maxi, newport magnum etc.
Puch maxi length chrome EBR forks. Night and day upgrade from your crappy stock forks especially for kitted folks.
Blk blk blk side stand for puch maxi. It's about 11 inches long from the swing arm mount to the very bottom of the stand.
Black and chrome side stand for puch maxi. It's about 9 inches long from the swing arm mount to the very bottom of the stand.
340mm rear shock perfect for puch magnum or whatever you have that needs a size close to this.
Perfect upgrade pipe for Tomos a3 and a35. Awesome performance increase on both stock 50cc and 70cc cylinders.
Round black headlight with chrome rim for all mopeds. The socket in this head light uses an 1157 dual filament bulb.
This is a high compression head for 70cc puch kits with the new style fins.
Puch Athena 45mm 70cc cylinder kit. This is the large reed block version, the 'mini gila" as we call it.
Puch pedal chain tensioner. For tensioning your pedal chain on your puch.
Universal rear axle adjusters for any moped that uses this type of adjusters.
Cheap effective universal puller for lots of bikes - e50, v1, m1 & m01, use it to pull an hpi etc.
1mm thick reducing shim for dellorto carburetors. Only works with 15.15 and 16.16 carbs. 21mm OD19mm ID
Universal "m" style 7/8" bars. About 22" from end to end.
Fork brace for keeping your fork legs together. You need this if you've upgraded to puch ebr forks. These also have a nifty fender bracket so you can keep your front fender!
16mm x 1mm puch magnum petcock.Also fits on Spartas!
New 15mm bing carburetor for puch mopeds, Upgrade from your stock carb!
Square black head light. Just like the ones that came on Tomos bikes. Uses a BA20D bulb.
Rear sprocket for Tomos a35 and a55 with 22 teeth. The ID on this is 42.5mm.
BiTurbo power for your a55.
Rear brake cable for Puch and lots of other mopeds.
Universal voltage regulator for 6v or 12v systems. Has four prongs on a metal frame. This is pretty much the same as a the regulators that came stock on A35 bullet, targa, sprint, colibri, tt, classic, targa LX and A55 arrow (05 only!), LX, ST, and sprint.
Awesome quality puch race crankshaft and needle bearing made by DMP. Un-stuffed crank for super high rpms and wide powerband.
High flowing performance enhancing speed crushing red foam air filter for bing carbs. Fits your 12mm, 14mm or 15mm bing carburetor. You may have to bore out the ID a little for an easier fit or just jam it on.
Replacement bearing and cup set for puch maxi headsets, will also work on newport, nostalgia, swinger and pinto.
Starter clutch cable for all mopeds equipped with the e50 engine.
Front brake cable for puch and pretty much every other moped.
5mm Dellorto main jets in the 70's range: 70, 72, 74, 76, 78. For use in all SHA and PHBG carbs.
5mm Dellorto main jets in the 80's range: 80, 82, 84, 86, 88. For use in all SHA and PHBG carbs.
Left side flow OMG petcock for lots of bikes that use 12mm petcock threads. Use this on lots and lots of bikes: Tomos, honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger, puch free spirit, puch pinto, batavus hs50 + + +
10mm x 1mm straight flow petcock. Works on Peugeot and Motobecane and also some italian gas tanks. Take note you may have some clearance issues on MBK with the outlet nozzle coming close to the pulley.
Awesome performance pipe for Tomos a3 and a35. Awesome performance increase on both stock 50cc and 70cc cylinders.
OMG brand petcock for motobecane av88 model mopeds. This is a push-pull valve with 8mm x 1mm threads, for 5mm fuel line.