Massive port 46mm 70cc cylinder for Peugeot 103 engines. Has three massive bridged port transfers and 4 booster ports plus a huge exhaust.
Clear light up spark plug cap for checking your spark and having an awesome glow down by your engine.
NGK spark plugs. BHS series. Best in the world!
Super awesome 5mm Tygon fuel line for all your fuel flowing needs.
Folding Pegs for you and a buddy. These mount over the rear shock bolt.
NGK spark plug boot LB05EP. This is the resistor type that uses the little cap on the tip of the plug. 90 degree bend for those hard to reach places!
Gooooold KMC 1/8" pedal chain for starting your moped. Comes with 112 links and a master link.
Silver KMC 1/8" pedal chain for starting your moped. Comes with 112 links and a master link.
Red light up spark plug cap for checking your spark and having an awesome glow down by your engine.
Awesome upgrade Dellorto SHA carb for most bikes.
Black domino style rear brake lever assembly with bonus grip already installed. Super low profile assembly for a nice clean look on your bars. Spring loaded plastic brake lever, brake lever is about 5.7" long. Use these on any moped - 7/8 or 22mm handlebars.
Super nice quality superman shape tail light for letting the folks behind ya know you're there.
Super nice quality supermanish shape tail light for letting the folks behind ya know you're there.
OMG brand petcock for motobecane mopeds. Left side flow = faces the carb = easy livin.
Trail Tech A/C Voltage Regulator. Stop blowing out those lights on kitted bikes! -Improved A/C Regulator with Adjustable Output.
Original silver Magura throttle with spring loaded brake lever and throttle tube. This style throttle originally came on tons of mopeds - puch, peugeot, batavus, sachs, kriedler.
Nice budget rear brake control option for savvy folks looking for the cheap alternative. Has spring loaded brake lever, threaded hole for brake light switch and a non-threaded hole for a mirror. Grab the lusito throttle control and you'll have a matching set yay!
Nice budget throttle option for savvy folks looking for the cheap alternative. This includes a grip, the throttle/perch/lever and a brake stop knarp for your brake cable. This has the super comfy bumpy style lever.
Cable stop for magura controls. Sold individually.
Small fuel filter for all mopeds. Perfect for tight spaces like moby or maxi!
Change your plug on the go with this 3/16" spark plug tool.
Single filament BAY15D bayonet base bulb for moped tail lights. 12v/8w.
Dual filament double contact BAY15D bayonet base bulb for moped tail lights. 6.5 Volt 1.02 Amp 6.63 Watt.
Dual filament double contact BAY15D bayonet base bulb for moped tail lights. 13.5 Volt .69 Amp 9.32 Watt.
Chrome frame brace for re-inforcing your super fast 103. This is a must have for a go-fast puegeot.
Used Puch OEM light and horn switch. Ooooooh.
Red 1/8" pedal chain with 112 links. Comes with a master link!
Performance replacement for any crankshaft needing a 12 x 15 x 15 needle bearing - Puch, Tomos, Minarelli, Morini, Derbi, Peugeot.
Super heavy duty universal ignition condenser for wiring externally. Get some new connectors if you need them.
Complete set of nuts and bolts to replace or rebuild your puch or any other 6-hole leleu rear sprocket - motobecane, peugeot, batavus etc.
Malossi carbon fiber reed block for puch polini cylinders, tomos a35 and peugeot 103.
You need this insert for superman tail light assemblies. This is the two bulb style, one for a 5w bulb and one for a 10w bulb.
Used long seat for motobecane. The vinyl is ripped and torn, but the foam is in good shape. Bust out your black duct tape or super glue or just park your butt as is.
New brake shoes for your puch spoke wheels and mags, and moby or peugeot spoke wheels.
10mm x 1mm straight flow petcock. Works on Peugeot and Motobecane and also some italian gas tanks. Take note you may have some clearance issues on MBK with the outlet nozzle coming close to the pulley.
Exhaust gasket for Honda hobbit pa50ii, Motobecane, Peugeot
Budget version replacement reed block with metal reeds for lots of bikes. The reeds are held in place by two small screws, so you can change out the metal reeds for any other reed material. Be sure to use to loctite on the screws! Put these on any a35 cylinder, peugeot 103, puch reed kits and puch polini!
1mm thick reducing shim for dellorto carburetors. Only works with 15.15 and 16.16 carbs. 21mm OD19mm ID
Authentic Dellorto SHA made in Italy. Awesome upgrade carb for most bikes. Slap this on your motobecane, peugeot, puch, minarelli, garelli, sachs, morini or tomos and forget about it. This is the click choke version.
Black plastic throttle and matching 7/8 grip from Lusito.
Modern style buddy seat for Moby and puegeot! This uses a seat post clamping system so you can probably use this on your puch or other similar bike! Just double check your seat post situation!
Round black headlight with chrome rim for all mopeds. The socket in this head light uses an 1157 dual filament bulb.
Stock tail light. This came standard on lots of bikes including puch and tomos. Fit this on pretty much any moped ever!This uses 2x single filament bulbs.
Caged headset bearing for puch maxi, motobecane, peugeot and vespa mopeds.
Universal 12mm sealed axle bearing for front wheels. 165m with spacers.
Blue light up spark plug cap for checking your spark and having an awesome glow down by your engine.
Universal high tension/external ignition coil for any moped you can fit it on. Works great with 6v, 12v points or CDI!
Check the pics for examples of what's included. Each pack is approximately 20 random pieces. Super grab-bag style!