Stock air filter element for sachs 504 and 505 motors that are running a square bing carb.
Stock air box for square bing carburetors, commonly found on Sachs 504 and 505 engines.
Airbox adapter kit for Sachs 504 and 505 stock airbox assemblies. Comes with the airbox adapter box, choke slide, choke spring, choke plate, an o-ring and four screws for mounting it to the carburetor.
Blue anodized clamp on aluminum velocity stack air filter for Dellorto PHBG carbs. 32mm ID.
These parts have been available separately from time to time, but not in one package! This is the complete kit for any bike using the Sachs 504 or 505 engine with the stock Square Bing carburetor. On top of the convenience, you get a bit of a discount as well!
Used, kinda crusty original air box filter for any Derbi that's using the original SHA carb. These will clean up super nice and they all have the original foam element.
Aftermarket stock Puch airbox filter for your 12mm, 14mm or 15mm bing carburetor.
PHBG metal mesh air filter. These fit on Dellorto PHVA and PHBG with the screw on adapter.- 35mm ID
60mm metal mesh high-flow filter for SHA carbs.
Black UNI Pod filter. For any carb needing a 44mm air filter. This fits straight onto Mikuni VM20, VM22, TM24 and TM28.
Black UNI Pod filter. For any carb needing a 44mm air filter. This fits straight onto dellorto PHBG carbs, Mikuni VM20, VM22, TM24 and TM28.
Super shorty compact air filter for all Dellorto SHA carbs. Comes with a hose clamp.
Double layer "dual stage" racing air filters from Stage6 with 2 layers of high quality foam with differing porosity for excellent air flow and optimum filtration. The perfect air filters for tuned / race engines.
Used but original Minarelli v1 grey plastic air filter cover. 60mm ID
High flowing performance enhancing speed crushing metal mesh air filter for bing carbs. Fits your 12mm, 14mm or 15mm bing carburetor. You may have to bore out the ID a little for an easier fit or just jam it on.
High flowing performance enhancing speed crushing blue foam air filter for bing carbs. Fits your 12mm, 14mm or 15mm bing carburetor. You may have to bore out the ID a little for an easier fit or just jam it on.
High flowing performance enhancing speed crushing red foam air filter for bing carbs. Fits your 12mm, 14mm or 15mm bing carburetor. You may have to bore out the ID a little for an easier fit or just jam it on.
Replacement filter for your 14.9, 14.12, 14.14,15.15 and 16.16 Dellorto SHA. Includes the screen, cap and clip.
This is the clip that holds your square bing airbox assembly together.
Top of the line quality Malossi air filter for Vespa SHA carburetors.
Super nice quality aluminum velocity stack for Keihin/PWK carbs, Dellorto VHST or any carb that has a 50mm OD air filter mount. The machining on this is flawless.
Used air box for Puch Magnums with stock bing carbs. This does not have the metal screen on the inside, it's just the box itself.
Blue anodized clamp on aluminum velocity stack for Keihin/PWK carbs. 50mm ID.
Chrome clamp on aluminum velocity stack for Dellorto PHVA carbs. 35mm iD.
Stock air filter element for Honda NC50 and NA50 Express mopeds.
All chrome bolt on velocity stack for Weber carbs. Hack the mounts off of this to make a cheap Mikuni TM velocity stack like Ben if ya want. Check the pic to see what's up.-57mm long-45mm ID-65mm OD
Velocity stack for Dellorto PHBL and VHST carburetors. Threads directly onto the air filter mount of the carb. 38mm ID.
Main hex jet for D slide OKO, Keihin and all PJ, PWK and PD carburetors. These do not work on the OKO PE carbs.
Idle jets for D slide OKO, Keihin and all PJ, PWK and PD carburetors. These do not work on the OKO PE carbs.
42mm - 44mm air filter for Mikuni VM20, Mikuni VM22, Mikuni TM24, and Mikuni TM28.
44mm ID mount. Used on 24-28mm Mikuni carbs.44mm ID and 4" long.
32mm ID for Dellorto PHBG carbs - no adapter needed just clamp it on!32mm ID and 3" long.
New old stock Jawa 210 airbox cover. OEM part number: 210.04.010
New old stock Jawa 210 intake tube. Czech tech!OEM part number: 28.3018
White adapter piece for square bing airbox assemblies.
Sliding arm on square bing carbs that engages the choke.