Lucky2strokes rebuilt Puch e50 engine rebuilt here at the shop. Add your favorite Puch cylinder, grab a carb and pipe, bolt it all to your frame and get to brapping! Specs within...
Used puch e50 engine cases in the nude already BORED OUT TO ACCEPT PUCH GILA CYLNDERS!!!!! The new over-bore size is 51.5mm.
Puch za50 engine in used condition. The crank spins really nicely on this engine, so you can probably run it as is.
Lightly used Tomos black clutch cover.
Used puch e50 engine cases in the nude. These are the four bearing type, so make sure you have a 2 bearing main gear! Paint me like one of your french girls.
Used puch e50 engine cases in the nude. These are the three bearing type, so make sure you have the 1 bearing main gear shaft! Paint me like one of your french girls.
Lightly used Tomos a55 clutch cover in a shimmery silver color.
Puch za50 engine in used condition. The crank bearings are seized so you will have to rebuild this if you plan on running it. If not, just use it for parts! Sold as is!
Morini m02, two-speed engine in used condition. The crank bearings spin really nice, definitely a solid start for an m02 rebuild. Sold as is!
Very lightly used Solo engine cases. Go nuts.
Used Tomos A35 engine with crank and some internals. The crank bearings definitely spin nicely, but a rebuild is always recommended!
Used Minarelli v1 bronco kickstart engine. The bearings spin well and it has all the fan parts intact and in good shape. The kickstart lever actuates and returns, but it feels like it could use a new kickstart return spring. Has a two-wire CEV points flywheel with integrated ignition/high tension coil combo. It uses these points.
Used v1 engine. Missing the clutch, and all the starter clutch parts. It has a non-full circle roller bearing crank and is not seized. Left hand threaded clutch nut included.
New old stock Jawa 207 engine case half. OEM part number: 28.1331
Kinda empty totally sad lonely and forgotten partially split carabela engine with lots of missing stuff. Lucky it mostly takes all v1 stuff. So yay.
New old stock Minarelli p4 engine cases in the nude. These will make a great start to a sick build! This is a "P" series engine, so you can build it up 50cc or 70cc!You can refer to this minarelli p4 shop manual for oem part numbers and diagrams.
Mostly complete Minarelli p4 engine. Comes with everything shown in the images. We tested that it shifts through all four gears and the kickstart works. Sweeeeeet! Throw a vintage kit on this and rip rip rip. No returns on this guy - it's sold as is. We're assuming that if you're buying this, you know what you're doing.
New old stock Garelli NOI engine case. This will fit a polini kit with no case boring.
New old stock Carabela engine cases. Giant transfers for the win!
Used Tomos A3 cases. These have been case matched to an unknown kit. Sold as is, no refunds!