Super heavy duty universal ignition condenser for wiring externally. Get some new connectors if you need them.

Awesome 2 wire on/off ignition switch perfect for mopeds.

NGK spark plugs. Long thread BES series.

NGK spark plugs. Resistor type long thread plugs.

NGK spark plug boot LB05FP. This is the resistor type that uses the little cap on the tip of the plug. 90 degree bend for those hard to reach places!

Trail Tech A/C Voltage Regulator. Stop blowing out those lights on kitted bikes! -Improved A/C Regulator with Adjustable Output.

Universal high tension/external ignition coil for any moped you can fit it on. Works great with 6v or 12v points or CDI!

Airplane red LED toggle switch with a carbon fiber style cover.

ADD TO CART TO CHECK STOCK!

LED toggle switch. Use it for kill switch or light switch. Pick your color!

HPI mini electronic CDI ignition for Morini moped engines. Super bright 60w lights and curved CDI box.

7mm spark plug wire for any moped.

CEV yellow wire points for italian stators. Probably for garelli, minarelli or morini.

Check the specs and match yours up with the picture before you buy these!

Locating pin dimensions: 4mm wide, 3.5mm tall

CEV with wire points for italian stators. Probably for garelli, minarelli or morini. wire may not be yellow on this one.

Check the specs and match yours up with the picture before you buy these!

Locating pin dimensions: 4mm wide, 3.5mm tall

replacement CEV wire points for italian stators. Probably for garelli, minarelli, carabela or morini.

Check the specs and match yours up with the picture before you buy these!

Locating pin dimensions: 3.9mm wide, 2.8mm tall

CEV yellow wire points for italian stators. Probably for garelli, minarelli, carabela or morini.

Check the specs and match yours up with the picture before you buy these!

Locating pin dimensions: 4mm wide, 6mm tall

Round LED rocker switch. Use it for kill switch or light switch. Pick your color!

Three terminals on the back. One for ignition lead, one for ground, one for led lead.

Waterproof toggle switch cover. Keep your switch from shorting out!

Simple moped toggle switch. Two wires - one for ground, one for power.