+25lbs of resistance from the stock spring for 1st and 2nd puch za50 and tomos clutches, saxonette clutches and m101 rear variators.
+30lbs of resistance from the stock spring for 1st and 2nd puch za50 and tomos clutches, saxonette clutches and m101 rear variators.
Gotta shave weight wherever you can if you wanna go fast. This is a great step towards increasing the power output from your bike! This will help distribute the oil more evenly over your clutch pads increasing their life while keeping them cooler.
Rear sprocket for Tomos a35 and a55 with 22 teeth.
Puch pedal chain tensioner. For tensioning your pedal chain on your puch.
Universal rear axle adjusters for any moped that uses this type of adjusters.
Cheap effective universal puller for lots of bikes - e50, v1, m1 & m01, use it to pull an hpi etc.
Rear sprocket for Tomos a35 and a55 with 22 teeth. The ID on this is 42.5mm.
One of the best, easiest upgrades for a puch 2 shoe or 3 shoe clutch. Super stiff for lots of low end slip.
Folding Pegs for you and a buddy. These mount over the rear shock bolt.
Replacement toothed belt for all variated Motobecane mopeds.1/2" x 32"
Replacement belt for all variated Motobecane mopeds.1/2" x 32"
Gooooold KMC 1/8" pedal chain for starting your moped. Comes with 112 links and a master link.
9.3oz can of Motul Road chain lube. Super tacky formula to resist high speed flinging.
e50 clutch bell. Regular cut gear. Used. Used. Used.
Minarelli v1 clutch retaining clip used to keep starting plates locked in.
New OEM clutch bell for tomos a35 and a55 engines. this is compatible with all tomos A35 and A55 engines. not A3 though!
Set of three Tomos A35 and A55 clutch pad shoes, enough to re-pad one first gear Tomos clutch. Cork lined for your pleasure. Fun fact: Tomos 1st gear clutch shoes show the pad material through a small window on the bottom side.If you need one of two pads, we also have sell them individually.
Pressure cup for sachs starter clutch mechanism. Or ashtray. You decide.
Used v1 internal main drive gear. Angled gears for use with angled gear clutch bells. Be sure to get a crown nut for this if you need it.
Minarelli v1 pedal shaft, just in case you bent, broke or lost yours!
original OEM tomos A35 A55 2nd gear clutch227019
riginal OEM tomos A35 + A55 1st gear clutch!the A35 and A55 both use the same 1st gear clutch so there's two different part numbers! 227018 - A35227849 - A55
Red 1/8" pedal chain with 112 links. Comes with a master link!
Silver KMC 1/8" pedal chain for starting your moped. Comes with 112 links and a master link.
Awesome quality chain breaker from Motion Pro with foldable handle. Weighs in at just over 11oz so you can toss it in any tool bag for rallys and use on the go!
This is a must have if you're running a Doppler ER variator. This replaces and upgrades your original pulley and adds clutch function to your ER variator.
Used clutch disk for sachs clutches. This is 2.5mm thick.
Blue 1/8" pedal chain with 112 links. Comes with a master link!
One convenient rebuild kit for Sachs 504 and 505 clutches. Includes one set of Lucky2strokes performance Sachs clutch discs, one clutch gasket and one oil level bolt. Saves you a few bucks from buying them separate!
Minarelli v1 regular [right hand] threaded clutch nut. Check to make sure you don't need the reverse thread clutch nut!
Universal red drive chain tension roller. Super useful for bikes with stretched swingarms. SPECS:-34mm length-36mm diameter-22.5mm diameter of the middle part-6900zz bearings with a 10mm ID
Used Sachs 504 and 505 metal clutch spring.
Original clutch side crankshaft nut for sachs engines.
Clutch disc for sachs clutches. Clutch clutch clutch. What does it even mean anymore.
Hub for sachs clutches. Looks like a mini skate ramp.
Weird roundish, squarish washer for sachs. What does it do? What are its mystical powers?
This spring returns the starter lever to its resting position on sachs clutches.
clutch bell for sachs motors - 504 and 505.
Starter clutch pin bolt for Sachs engines.
Used internal driving gear for Tomos a35 and a55 engines.
Used puch za50 clutch starter plate.
Original OEM Puch internal tensioner for za50 motors. I'm sure you're all familiar with this thing. This moment of frustration brought to you by: Puch.
Used puch za50 second gear clutch.
Used puch za50 first gear clutch.
Used puch za50 second speed driving plate. 22 teeth.
Used puch za50 clutch engaging plate.
Used puch za50 main shaft gear with 64 teeth on the big gear and 14 teeth on the small gear. This came on the faster 1.5 horse power and 2 horse power engines. So if you have the 66 tooth version switch to this to cram more horses in your engine!
Used puch za50 clutch bell. This has a 10.3mm id for the shaft and 16 teeth on the gear.
this is a used part from an original puch za50 two speed engine. may be a
little worn from being in some moped of the past but it is a
functioning engine part. no complaining!!uses the 16100 bearing**unfortunately this version will not fit on the za50 super stuffy crank without changing out the 16100 the bearing**PLEASE NOTE ** this one we have right now is in nice shape! much better than the photo.**