Black plastic throttle and matching 7/8 grip from Lusito.
Stock tail light. This came standard on lots of bikes including puch and tomos. Fit this on pretty much any moped ever!This uses 2x single filament bulbs.
original OEM CEV taillight with licence plate bracket. very nice cause you can just mount your license plate right to
Super nice quality superman shape tail light for letting the folks behind ya know you're there.
Folding Pegs for you and a buddy. These mount over the rear shock bolt.
Clear fuel filter for standard 5mm fuel line.
Super awesome 5mm Tygon fuel line for all your fuel flowing needs.
Change your plug on the go with this 3/16" spark plug tool.
Awesome 2 wire on/off ignition switch perfect for mopeds.
ADD TO CART TO CHECK STOCK!NGK spark plugs. BHS series. Best in the world!
ADD TO CART TO CHECK STOCK!
NGK spark plugs. Resistor type short thread plugs.
NGK spark plug boot LB05FP. This is the resistor type that uses the little cap on the tip of the plug. 90 degree bend for those hard to reach places!
Small fuel filter for all mopeds. Perfect for tight spaces like moby or maxi!
Trail Tech A/C Voltage Regulator. Stop blowing out those lights on kitted bikes! -Improved A/C Regulator with Adjustable Output.
Dual filament double contact BAY15D bayonet base bulb for moped tail lights. 13.5 Volt .69 Amp 9.32 Watt.
Fuel filter for the 13mm Dellorto SHA carbs that you'd find on Vespa and Kinetic.
Universal 12mm sealed axle bearing for front wheels. 165m with spacers.
Universal high tension/external ignition coil for any moped you can fit it on. Works great with 6v or 12v points or CDI!
Check the pics for examples of what's included. Each pack is approximately 20 random pieces. Super grab-bag style!
Airplane red LED toggle switch with a carbon fiber style cover.
ADD TO CART TO CHECK STOCK!
Universal 12mm sealed axle bearing for rear wheels. 190mm long with spacers.
Dual filament 12 volt 1157 light bulb with BAY15D base. Two filaments. Use for head light with low/hi beam, or tail light/brake light.
OEM 18 tooth freewheel for kinetic and vespa rear wheels. This is a regular clockwise thread french threaded freewheel.
OEM 19 tooth freewheel for kinetic and vespa rear wheels. This is a regular clockwise thread french threaded freewheel.
Flywheel nut for kinetic and vespa freewheels.
ADD TO CART TO CHECK STOCK!LED toggle switch. Use it for kill switch or light switch. Pick your color!
New old stock kinetic magnum frame with wire harness. Super cool start to a custom vespa build!
Italian Motomarina Sebring style bolt on reflectors. On sebrings these bolt on the fork nuts and hang down the side of the fork.94 x 29 x 8mm
Also found on Tomos some models. Tomos part number 222424CEV 218
We have 8.5mm and 9.5mm pins. Double check which size you need and select your size from the drop down.
replacement chrome pedal arms for mopeds. you'll need some cotter pins though. IF your pedal shaft for some reason doesn't have enough space for these
arms then yeah you gotta use another type we sell, and bummer for you.
9/16" pedal thread size
182mm total length
47mm of outward clearance
uses 9.5mm cotter pins.
replacement short chrome pedal arms for mopeds
replacement short black pedal arms for mopeds
replacement black pedal arms for mopeds
7mm spark plug wire for any moped.
Cool vintage line license plate bracket for pretty much anything. Comes with two bolts for mounting.
Round LED rocker switch. Use it for kill switch or light switch. Pick your color!Three terminals on the back. One for ignition lead, one for ground, one for led lead.
Waterproof toggle switch cover. Keep your switch from shorting out!
Simple moped toggle switch. Two wires - one for ground, one for power.
You need this insert for superman tail light assemblies. This is the one bulb style, so it wont fit in every superman style lens housing. Make sure this is the one you need.
Universal moped 6 volt light bulb with two filaments. Use these for head light with hi/low beam or for tail light/brake light. BAY15D 6v 5/21W
Rare bay15d 6v 3/10w dual filament bulb. These are commonly used on Jawa 207 mopeds for the taillight and plenty of other mopeds too!
Used superman tail light lens.
Single filament 12 volt 25 watt light bulb with a BA15S base. Use for head light or tail light depending on what you need.
USED stock right hand side cover for a Kinetic Magnum.
As close to original OEM moped pedals as you're gonna find. Left and right side 9/16 threads.