Nice budget throttle option for savvy folks looking for the cheap alternative. This includes a grip yay! the throttle/perch and a brake stop knarp for your brake cable.
Stockish looking chrome switch made by Guia. Use it for lights, kill, horn - whatever you want. Mounts to all 7/8" bars.
Black plastic throttle and matching 7/8 grip from Lusito.
Round black headlight with chrome rim for all mopeds. The socket in this head light uses an 1157 dual filament bulb.
New brake shoes for your puch spoke wheels and mags, and moby or peugeot spoke wheels.
Black domino style rear brake lever assembly with bonus grip already installed. Super low profile assembly for a nice clean look on your bars. Spring loaded plastic brake lever, brake lever is about 5.7" long. Use these on any moped - 7/8 or 22mm handlebars.
Left side flow OMG petcock for lots of bikes that use 12mm petcock threads. Use this on lots and lots of bikes: Tomos, honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger, puch free spirit, puch pinto, batavus hs50 + + +
Replacement Puch and Batavus points with condenser wire.
Stock tail light. This came standard on lots of bikes including puch and tomos. Fit this on pretty much any moped ever!This uses 2x single filament bulbs.
original OEM CEV taillight with licence plate bracket. very nice cause you can just mount your license plate right to
26mm x 1.5mm and 22 x 1.5mm flywheel puller for tons of Bosch flywheels - Puch, Kreidler, Tomos a3/a35, Batavus m56, Solo and Derbi Motoplat flywheels.
Super nice quality superman shape tail light for letting the folks behind ya know you're there.
Cable stop for magura controls. Sold individually.
mini cable knarp for moped cables. most people use these on their clutch or throttle ends.measures M4 - 7mm long - 5mm OD
puch magnum style moped pedals!! these are 9/16" thread and will fit most mopeds!
long cable knarp for moped cables. works great for brakesM6 - 15mm long - 8mm OD - 7mm
Locking gas cap for most bikes that use 30mm wing style gas caps. Puch Maxi, Tomos, Garelli, Minarelli, Batavus etc.
Super heavy duty universal ignition condenser for wiring externally. Get some new connectors if you need them.
Nice chrome gas cap for any tank using 30mm caps.
Folding Pegs for you and a buddy. These mount over the rear shock bolt.
Gooooold KMC 1/8" pedal chain for starting your moped. Comes with 112 links and a master link.
Clear fuel filter for standard 5mm fuel line.
Super awesome 5mm Tygon fuel line for all your fuel flowing needs.
Change your plug on the go with this 3/16" spark plug tool.
output shaft seal for sachs 505 and 504! + magneto side crank seal for batavus M56 & trac M56!
Awesome 2 wire on/off ignition switch perfect for mopeds.
Red 1/8" pedal chain with 112 links. Comes with a master link!
ADD TO CART TO CHECK STOCK!NGK spark plugs. BHS series. Best in the world!
ADD TO CART TO CHECK STOCK!
NGK spark plugs. Resistor type short thread plugs.
Silver KMC 1/8" pedal chain for starting your moped. Comes with 112 links and a master link.
NGK spark plug boot LB05FP. This is the resistor type that uses the little cap on the tip of the plug. 90 degree bend for those hard to reach places!
Small fuel filter for all mopeds. Perfect for tight spaces like moby or maxi!
Mounting bracket clamp for stock Puch switches.
Blue 1/8" pedal chain with 112 links. Comes with a master link!
Trail Tech A/C Voltage Regulator. Stop blowing out those lights on kitted bikes! -Improved A/C Regulator with Adjustable Output.
Nice budget rear brake control option for savvy folks looking for the cheap alternative. Has spring loaded brake lever, threaded hole for brake light switch and a non-threaded hole for a mirror. Grab the lusito throttle control and you'll have a matching set yay!
Dual filament double contact BAY15D bayonet base bulb for moped tail lights. 13.5 Volt .69 Amp 9.32 Watt.
new old stock Puch OEM light and horn switch. Ooooooh.
Complete set of nuts and bolts to replace or rebuild your puch or any other 6-hole leleu rear sprocket - motobecane, peugeot, batavus etc.
OEM BOSCH brand replacement points for Puch, Batavus, and Sachs mopeds.
Caged headset bearing for puch maxi, motobecane, peugeot and vespa mopeds.
Universal 12mm sealed axle bearing for front wheels. 165m with spacers.
Universal high tension/external ignition coil for any moped you can fit it on. Works great with 6v or 12v points or CDI!
Check the pics for examples of what's included. Each pack is approximately 20 random pieces. Super grab-bag style!
Airplane red LED toggle switch with a carbon fiber style cover.
ADD TO CART TO CHECK STOCK!
Universal 12mm sealed axle bearing for rear wheels. 190mm long with spacers.