original tomos speedometer cable for pre 2001 / 2003 model tomos mopeds.this
will usually fit A3 87-91 golden bullet, A35 92-06 targa, lx, sprint,
tt, classic, bullet, and colibri. you must double check the measurements
below tho to make sure this is what you need as tomos sometimes come
with different configurations. A35 03-06 sprint and lx might use this cable that our friends at treatland have. instead so you must check! did you remember to check? goodabout 760mm longspeedo cable threads are 10mm x 1mm at the small end and 12mm x 1 at the large end. Speedo cable inner square end is 2mm x 2mm tomos part number - 213729
Used dashboard + speedometer originally for Sachs G3 but if you're clever you can use this on any moped with 17 inch rims. It has 3236 on the ODO. Grab a speedo cable too if you need it.
Super rad chrome 0 - 15,000 RPM analogue tachometer gauge from Koso. Comes with a mounting bracket for easy installation on your bike, wires for the back light and some hardware. Aside from being super badass, this is a great tool to help you tune and dial in your clutch engagement and powerband.
Used dashboard with speedometer and a whole mess of wires and switches originally for Puch Magnum, but you can use this on any Puch.
Used dashboard cover originally for Puch Magnum, but you can use this on any Puch.
Original 12,000 RPM CEV Derbi tachometer gauge for measuring your revvs.
New old stock Puch 30mph VDO speedometer. Grab a speedo cable if you need it and the speedo housing too!
New old stock speedometer housing for a stock Puch speedo. Comes with the bracket for mounting on the handle bars.
Fix your busted Puch speedo parts so you know how much more throttle you need to fist to get pulled over.
23.5 inch or 60cm speedometer cable for VDO speedos and drives.
Used speedometer for a Tomos streetmate.
New old stock CEV speedometer cover shroud holder cover thing. Yeah. Looks like theres some extra space to drill holes and mount some custom switches.
Original motobecane speedometer cover cap thing for square moby head lights.
Carbon fiber Tomos Nitro dashboard cover.
Stock speedometer bracket for Puch speedos. Use this for your speedo orrrrrrr pro tip - dremel out the two holes a little bit and use it to mount your trail tech TTO gauges anywhere ya want. Sweet custom shit bro.
New old stock speedometer. About 50mm tall by 48mm wide.
Used derbi speedo bracket.
New old stock all metal VDO speedometer drive. VDO number: 23LH 23/5.
Nothing says bad-ass racer like flags on your speedo. Mount this up custom for super styling and pro status.
New old stock 45mph VDO speedo. Measurements within!
Plastic VDO speedo drive. Its marked with 16RH 16LH 32/1 7.79
Plastic VDO speedo drive. Its marked with 16RH 16LH 32/1 2.83
Used Derbi DS50 dashboard with speedo, gas gauge, turn signal and light indicators.