Round black headlight with chrome rim for all mopeds. The socket in this head light uses an 1157 dual filament bulb.
Square black head light. Just like the ones that came on Tomos bikes. Uses a BA20D bulb.
Stock tail light. This came standard on lots of bikes including puch and tomos. Fit this on pretty much any moped ever!This uses 2x single filament bulbs.
original OEM CEV taillight with licence plate bracket. very nice cause you can just mount your license plate right to
Super nice quality superman shape tail light for letting the folks behind ya know you're there.
Super durable metal head light ears for almost any size. They come with a ton of rubber for reducing the diameter needed on the fork tubes. Ears are about 5" long, total length is about 7" long.
Original replacement tail light socket for Tomos Streetmate, Streetmate R and Revival. Uses a dual filament 12v bulb. Tomos OEM part number: 232721
The eyes glow on these dead head LED skull bolt on mini lights. M6 size. Attach these anywhere! Comes with about 1.5ft of wire. Red wire is the positive lead, black is ground. Skulls are about 16mm wide.
Black metal round CEV head light bucket as found on 99% of mopeds. We have a few of these, some of them are ugly and and a little rusty, so dont be looking for perfection!
Dual filament double contact BAY15D bayonet base bulb for moped tail lights. 13.5 Volt .69 Amp 9.32 Watt.
NOS square head light lens for those 80's style square puch head light fairings. Says Puch on the lens even! uses p26 bulbs and includes the bulb holder.
Replacement BA20D bulb for Tomos mopeds and many scooters. 12v 45/40w.
Super durable metal head light ears for 28mm - 35mm fork tubes. Ears are about 5" long.
OEM sealed beam head light lens for honda hobbit. Should also fit NC50, NA50.
Super bright LED blinky back up light.
Red LED indicator light. Use this to remind you if your lights are on, or to run as an ignition test.
Dual filament 12 volt 1157 light bulb with BAY15D base. Two filaments. Use for head light with low/hi beam, or tail light/brake light.
Replacement 6v sealed beam head light bulb. Fits in standard moped sized round head lights. 6v 30w.
Replacement 12v sealed beam for moped headlights.
an awesome private collection of goodies to repair your broken headlight
or upgrade your sealed beam headlight to take standard dual filament
bulbs! the glass lens/reflector fits most bullet headlights along with
most vespa headlight that take sealed beam units. includes headlight bucket, glass lens/reflector and bulb socket! this does NOT include the chrome headlight ring or the metal clip that holds the socket in place!socket accepts BAY15D dual filament bulbs.inside
lip of the glass reflector is 102mm. please verify that this is the
same for your headlight before purchasing to be safe!!!
Original black left side headlight bracket for Tomos a35. Should fit on LX, Targa and Sprint forks.
Original black right side headlight bracket for Tomos a35. Should fit on LX, Targa and Sprint forks.
Long-Life Xenon T3.25 Festoon Base light bulb. Has 5,000 Life Hours and puts out 5watts and 50 Lumens - 12 Volt.
NOS tail light lens for an AMF roadmaster.
Miniature 6v single filament light bulb with a BA9S base.
3 prong universal moped 12v flasher relay for making lights flash on your moped. Hook it up to your head light just for fun maybe.
New old stock Motobecane av88 head light bucket in white. This one does not have the bulb socket or the speedo cover.
CEV tail light bracket. Commonly found on lots of italian bikes. The two top mounting holes are 50mm center to center.
This is a coil for some Sachs Motoplat ignitions, maybe other bikes too! 47mm eye to eye.
This is a lighting coil for some Sachs Motoplat stators, maybe other bikes too! 47mm eye to eye.
CEV tail light bracket with an option for a license plate. The two top mounting holes are 50mm center to center.
You need this insert for superman tail light assemblies. This is the one bulb style, so it wont fit in every superman style lens housing. Make sure this is the one you need.
Round with squared off edge amber turn signal lens cover. The mounting holes are about 55mm apart.
Universal moped 6 volt light bulb with two filaments. Use these for head light with hi/low beam or for tail light/brake light.
Used superman tail light lens.
Super nice universal black and chrome headlight for any moped ever!
Flasher relay box from a Derbi DS50 scooter. I'm sure you could use this on almost anything though.
6 volt headlight bulb for Honda express and supercub for sure. Probably many others too! Check your bulb before ya buy.
Rounded amber lens cover for turn signals. Mounting holes on this are 65mm apart.
Rounded red lens cover for turn signals. Mounting holes on this are 65mm apart.
Red cateye lens cover for turn signal assemblies. The mounting holes for this are 33mm apart. Measure your setup before you buy it!
Stock rounded tail light lens.
Red lens cover with shark fin and flat bottom. Mounting holes on this are 40mm apart.
Super classy bullet style short turn signal. Originally for suzuki mopeds but mostly universal for whatever you can dream about putting it on. Comes with wires but no nut for the threaded end.
Longer turn signal originally for suzuki mopeds but mostly universal for whatever you can dream about putting it on.
Amber cateye lens cover for turn signal assemblies. The mounting holes for this are 33mm apart. Measure your setup before you buy it!
Kinda slightly diamond shaped amber lens cover for turn signals. Mounting holes on this are roughly 73mm apart.
Square amber lens cover. Mounting holes on this are 87mm apart.
Reflective head light insert. I'm sure you'll know if you need this.
Single filament 12 volt 25 watt light bulb with a BA15S base. Use for head light or tail light depending on what you need.